Antibacterial and antifungal agents ADM-50F

Antibacterial and antifungal agent ADM-50F This is an antibacterial and antifungal agent developed by our company, possessing internationally advanced technology. It has... With advantages such as high safety, good heat resistance, and good chemical stability, it can be added to various coatings, latexes, adhesives, and rubber. It plays a role in preventing mold and bacteria in adhesives and plastics.

1. Physical properties

— — Active ingredient content (%) ≥ 98.0% —Appearance: Off-white powder

2. Features and benefits

—This product is a broad-spectrum antibacterial and antifungal agent with long-lasting antibacterial and antifungal effects.

—Low additive dosage, high efficiency, stable, and long-lasting effect.

It is harmless to the human body, non-irritating to the skin, a safe and non-toxic product, free of VOCs , and has no impact on the environment.

It has good compatibility with various coatings, adhesives, plastics and foam materials, and has excellent erosion resistance. It has high chemical and thermal stability and can withstand high temperatures of 240℃.

Minimum inhibitory concentration ( MIC ) against common spoilage and mold microorganisms :

4. Instructions for use and dosage:

Antibacterial and antifungal agents ADM-50F It has good compatibility with various coatings, latexes, adhesives, rubbers , plastics, and foaming materials. The compatibility of the components needs to be considered, and attention should be paid to their dispersion in the substrate during use. Theoretically, the more uniform the dispersion, the better the mold resistance. The better the effect of the bacteria, the less the actual amount can be added.

For products such as coatings, latex, and adhesives, they can generally be added and mixed with other raw materials in the early stages of production. It can also be added to the finished product and stirred thoroughly before use. Recommended addition amount: 0.2%-0.6%;

For materials such as plastics, rubber, and thermoplastic elastomers, it is generally added before cross-linking and curing, and before production. Mix thoroughly with resin and other additives. Recommended addition: 0.3%-0.8%;

For foamed materials, add this product before the cross-linking and curing stage of the foamed product , and mix thoroughly until the product is homogeneous. Disperse, then foam according to the normal foaming process. Recommended addition amount: 0.3%-0.8%

5. Packaging and storage:

25 kg /box, or can be packaged according to customer requirements.

Avoid freezing. Store in a cool, dry, dark place at room temperature, sealed. Shelf life: 12 months.