Product Description

Physical properties

Features and advantages

Product Information

ADM ■ Ag 930Antibacterial agents

ADM-Ag 930The antimicrobial agent is a polymer-based antimicrobial agent that is delivered and fixed onto the treated fabric via a patented delivery system.

Fixed silver ions. This innovative system can control the release of silver and prevent... Change color and anti- bacteria becomepointPassmorningquilt Exhausted . Textile WeavingTaste and fiberdimensionbornProduce Pass Proceduremiddleadd enterADM-Ag 930 antibacterial agent inhibits odors caused by microbial growth and absorbs certain odors, thus maintaining a long-lasting freshness.

ADM-Ag 930 antimicrobial agent is supplied in liquid form for easy dispensing and mixing. This antimicrobial agent is compatible with a variety of textile chemicals , including emulsion resins (such as acrylic acid and PVA).SBREVA and finishing agents (such as anti-wrinkle resin, absorbent agents, fluorocarbons, and softeners) .

The following isADM - Ag 930Typical properties of antibacterial agents (not product specifications).

1Brookfield DV-IIViscometer, LV1Rotor number 1, speed 30 rpm

•Overall odor control: It can suppress odors caused by microbial growth.It also absorbs some common human body odors, thus keeping the fabric smelling fresh.

•Intelligent control: Silver is released in a controlled manner, thus enabling it to withstand... 50 household washes; longer-lasting effectiveness; lower processing costs .

•Broad-spectrum activity: Controls various odor-producing microorganisms that accumulate on textiles and fibers due to skin contact and repeated washing.

•able to pHValue as low as Even at 4.5 , it still gives the fabric higher color stability.

•Thermal stability: It can withstand the drying process.180°C for several minutes

•It can be processed onto natural and synthetic fibers through spraying, padding, and impregnation processes.

•It is compatible with a variety of additives used in woven and nonwoven fabrics, including fluorocarbons, softeners, and wrinkle-resistant resins.

•Maintain the beauty of the fabric

•Skin tested; the treated fabric has excellent skin tolerance.

ADM - Ag 930The antibacterial agent has been tested on a variety of microorganisms, proving that it can effectively control the growth of a variety of Gram-negative and Gram-positive bacteria and fungi.

3% ADM - Ag 930Antibacterial agentsEffect on standard fabric

No.1 page

common 4 pages

*E. coli Diluted 1:500 in nutrient broth as an inoculum. Results were compared with... The decrease in the number of E. coli after 0 hours compared to the untreated control . A negative number indicates microbial growth.

washing After 50 cycles, polyester Antibacterial effect of cotton blend fabric ( 60/40 )

ADM-Ag 930Antibacterial agents

Ag 930Antibacterial agent ( % )

AATCC100Sterilization rate

* Captured odor molecules refer to those that have been...After HS-GC-MS processing, its reduction rate is higher than50%Those smells; in total forNine human odor molecules were evaluated.

User GuideADM-Ag 930   Antibacterial agents can be processed onto various fibers through padding, dip-dip, printing, and spraying processes .

Fabrics and knitwear. ADM-Ag 930Antimicrobial agents can be applied using most industry-standard equipment through impregnation and padding. Aimeier strongly recommends that during chemical finishing processes, other... " Sacrificial type" Before non -durable treatment processes (e.g., before using waterproofing agents, moisture-wicking agents, softeners, etc. ), useADM-Ag 930 antibacterial agent. (Added)ADM-Ag 930

Before applying antibacterial agents, the fabric needs to be thoroughly cleaned and neutralized to achieve the best long-lasting antibacterial performance.

Compatibility: ADM - Ag 930The antibacterial agent has good compatibility with many textile finishing chemicals (including waterproofing agents, moisture-wicking agents, softeners , optical brighteners, and dyes) and can be added to the same solution simultaneously. Preliminary testing is recommended.To ensure good compatibility of various chemicals in the solution and to ensure that the whiteness and washability of the fabric are not altered. (Addition)ADM - Ag 930Before using antibacterial agents, avoid using the following chemicals, or ensure the fabric is thoroughly rinsed .To achieve ideal whiteness, durability, and antibacterial properties: *

•sulfur dyes

•Reducing agents: sodium hydrosulfide, sodium dithionite, sodium thiosulfate, glucose, citric acid, etc.

• Adding excessive amounts of salt (e.g., MgCl2 ) to a water bath or fabric .To promote absorption

•enzymes or natural proteins

•Some strong cationic finishing agents

*The above information regarding compatibility and usage of our products reflects our current understanding. The specific properties of the finished fabric should be evaluated by the user prior to its commercial application.

Impregnation operation: Depending on durability requirements, the amount of ADM-Ag 930 product used should be [amount missing] of the weight of the fabric to be treated . 1.5% to 5% , corresponding to a silver content on the fabric surface of 5%. 15 to50ppm .

1. Thoroughly clean and neutralize the fabric.

2. Add the required amount of water to a separate dilution container for the immersion equipment. 80% clean water.

3.Slowly add ADM - Ag 930 to the water.Apply the antibacterial agent and stir continuously at room temperature until the solution reaches the final suitable concentration based on the weight of the fabric to be treated.

4. Continue adding water while stirring constantly until the solution volume reaches the working solution volume.100% .

5.DilutedADM-Ag 930The antibacterial agent solution is added to the main impregnation equipment.

6. Slowly add dilute acid to the diluent. [The solution...] pHValue adjusted to 4.5-6.5 (best) 5.0 ). It is best to use a buffer solution to control it. pH value (Note) 1-3 ). Do not use citric acid, as it may cause discoloration of the fabric.

7.Heat the leaching solution to no more than 80˚C , according to the recommended liquid Continue immersion with a fabric ratio of 10:1 .20 minutes. Below Effective adsorption was observed at 80˚C .

8. Dry at 180℃ or below. No specific baking temperature is required.

annotation 1 : After Solutions with adjusted pH values must not be stored for later use.

annotation 2It has been verified that 90% of clean water and10 % buffer A suspension composed of A and B has an ideal buffering effect. Buffer AContains79 %0.1M sodium acetate and twenty one%  of 0.1M acetic acid.

annotation 3 : The pH electrode should be cleaned immediately after use to prevent the accumulation of polymer residues .

Padding operation: The amount of ADM - Ag 930 product used should be equal to the weight of the fabric product to be treated.1% to 5% , corresponding to a silver content on the fabric surface of 5%.10 to 50ppm .

1. Rinse the fabric thoroughly.

2. Add the required amount of water to the padding equipment in a separate dilution container. 90% pure water. (Note) 1 )

3.Slowly add to the waterADM - Ag 930 antibacterial agent was stirred continuously at room temperature until the solution reached the final suitable concentration calculated based on the liquid carryover rate.

4. Continue adding water while stirring constantly until the solution volume reaches the working solution volume. 100% . (Note) 2 and annotations 3 )

5. Dilute theADM-Ag 930The antibacterial agent solution is added to the main impregnation and rolling equipment.

6.The padding operation is performed using standard temperature and pressure. To ensure optimal treatment results from ADM - Ag 930 antimicrobial agent designed based on fabric weight .

7. Dry at 180℃ or below. No specific baking temperature is required.

annotation 1. It is best to use municipal tap water; the use of high-hardness water (including groundwater) is not recommended. If the impact of water quality is unclear, please conduct a trial before large-scale production.

annotation 2 : If the solution in the padding tank If the pH value must be acidic, then a weak acid is used to lower the pH of the diluted solution. pH value. Do not use citric acid . Do not make the solution... pH value is lower than 4.5 ; For color-sensitive fabrics (e.g., white fabrics ), it is best to... pH value maintained 5.0 to Between 8.5 and 8.5 .

annotation 3 : EvenADM-Ag 930 working solution pH value higher than 7.0 , final fabric The pH value can still be maintained. 7.0The reason is that ammonia will evaporate during the drying process.

Storage, operation and processing         Use in a well-ventilated place where there are no sparks or open flames.ADM - Ag 930 antibacterial agent. Suitable for use with ordinary municipal tap water.

However, the water must not contain high concentrations of metal ions and chlorine; water treatment facilities should be used where possible. For comprehensive guidance, please refer to the relevant documentation .Contact Aimer personnel before purchasing ADM - Ag 930 antibacterial agent products.To ensure proper and effective use , please refer to the product's Safety Data Sheet ( SDS ) for accurate usage instructions . The processing and use of industrial chemicals require sufficient technical and professional knowledge. Generally, avoid contact with eyes and skin, and wear appropriate personal protective equipment. Avoid prolonged continuous inhalation.ADM - Ag 930Antibacterial agent vapor. Should be in a ventilated area.Store in well-ventilated areasADM-Ag 930 antibacterial agent. Store in its original container under normal environmental conditions, keeping it sealed. Avoid freezing and heat.

Product Supervision              Before considering any Aimer product for a specific purpose, please review the latest Safety Data Sheet ( SDS ) and

For domestic product labeling,To ensure that the intended use is within the approved scope . Aimair deeply cares about all those involved in the production, distribution, and use of its products.And our living environment . This concern is the cornerstone of our product surveillance philosophy; based on this philosophy, we assess the safety, health, and environmental information of our products and take appropriate measures to protect the health of our employees and the public, as well as our environment. The success of our product surveillance program depends on...Everyone involved with Amer products – including everyone involved in the entire process of initial conception and development, production, use, sales, disposal and recycling of each product .

Aimair strongly encourages its customers to evaluate their own manufacturing processes and their application of Aimair products from the perspective of human health and environmental quality.To ensure that Aimeer products are not used in any unapproved or untested manner. Aimeer personnel will answer your questions and provide appropriate technical support. Please refer to the Aimeer product manual before using Aimeer products .Includes Security Data Sheets ( SDS ). Aimer can provide the most up-to-date Security Data Sheets ( SDS ).

Note: This document makes no inference regarding liability for infringement of any patents owned by Aimeer or others. As conditions of use and applicable regulations may vary by location and time, it is the customer's responsibility to determine whether the products and product information in this document are suitable for their use and to ensure that their workplace and product disposal practices comply with applicable laws and other government regulations. The products described herein may not be available in all regions where Aimeer operates . / or supply. Product descriptions in this document may not be approved for use in all countries and regions. Aimeier assumes no obligation or responsibility for the information contained in this document. Unless otherwise expressly stated, references to "Aimer " or "Our company All entries in this document refer to Amer legal entities that sell products to customers. Amer makes no warranties whatsoever; Amer makes no express or implied warranties of merchantability or fitness for a particular purpose. Please use the disinfectant safely. Always read the label and product information before use.