Antimicrobial agents for textiles

Model : ADM - BJ 7211

one, Introduction

ADM-BJ7211 It is a cationic antibacterial agent based on organosilicon quaternary ammonium salts for textiles, using water or alcohol as a carrier. It has extremely high safety , is non-toxic, non-irritating, colorless and odorless . It can firmly bind to the fiber surface to form a durable, wash-resistant, and non-migrating protective layer , thereby giving textiles excellent antibacterial efficacy, effectively controlling the growth of microorganisms and the generation of odors , thus maintaining long-lasting freshness.

ADM-BJ7211 It is suitable for most textiles such as cotton, nylon, and polyester, and can be widely used in clothing, socks, towels, bedding, filling materials, shoe materials, non-woven fabrics, and leather.

II. Features

●      High efficiency Stable, long-lasting antibacterial effect

● Broad-spectrum antibacterial activity, effectively inhibiting the growth of Gram-positive and Gram-negative bacteria.

● It can prevent the growth of microorganisms that cause odors, giving textiles or products a long-lasting fresh and hygienic feel.

●      Physical antibacterial properties No drug resistance issues

●      Aqueous solution, Odorless

●      Free from arsenic , tin, or other heavy metals and polychlorinated phenols.

●      High temperature resistance up to 180°C ° C

●      Safe for skin contact

●      Chemically bonded and non-releasing, it will not release substances into human skin or the environment.

●      It does not accumulate biomass and will not cause persistent pollution to the environment.

III. Main Physical Properties

IV. Application Guide

Preparation of working solution : The sequence is as follows : add water, add softener or other chemicals while stirring, and finally stir the product until it is evenly distributed. It can generally be used in the same bath as cationic and nonionic textile chemicals, but compatibility must be determined in advance through testing, especially with brighteners or anionic auxiliaries.

Padding process : Apply diluted ADM-BJ7211 onto the fabric using the padding method . Recommended drying temperature . 1 80C the following.

Immersion process : after dilution ADM-BJ7211 It can be quickly absorbed into textile fabrics . The optimal conditions for the immersion working solution are a neutral or slightly acidic pH . pH value ( recommended pH value is 5-6, which can be adjusted with acetic acid or citric acid ). Immerse for 20-30 minutes at room temperature or below 40°C . Drying time: minutes, recommended drying temperature : 1 minute. 80 ° C the following.

Spraying process : Dilute the... ADM - BJ 7211 The working fluid is sprayed onto the fabric.

V. Recommended Dosage

varies depending on factors such as the type of substrate being treated, the required level of antibacterial performance, the number of washes required, and the washing temperature .

VI. Packaging Specifications      25kg/ barrel.

VII. Storage and Transportation      Store at room temperature, away from light, in a sealed container to prevent moisture.

8. Precautions: Wear protective clothing, rubber gloves, goggles, and a mask. Avoid contact with skin, eyes, and mucous membranes. Although there is no harm when used correctly , prolonged direct skin contact with undiluted product should still be avoided. If splashed on the skin, rinse thoroughly with water.

www.aihaoer.net                      0769-829 53390 Dongguan Admier Anti-mold and Antibacterial Technology Co., Ltd.

Guangzhou Industrial Microbiology Research and Testing Center